Model: AC-HF903
HF RFID Gate Reader AC-HF903
$1192.00
暂无数据
Cable length:
Chip:
Interface:
Frequency:
Shipping cost within 10kg is $100, and for every additional 1kg, the shipping cost increases by $5
Description
High-frequency security gates utilize three-dimensional sensing radio frequency technology, enabling rapid and batch detection of RFID electronic tags in any direction within the sensing area. They are primarily used in libraries, archives, and other settings for access control and theft prevention, serving both batch identification and alarm functions.
This high-frequency security gate supports electronic tags from multiple manufacturers that comply with ISO/IEC 15693 and ISO 18000-3 standards. It supports both active and passive (triggered) alarm modes. The antenna board uses a 20.0mm thick transparent acrylic design, featuring a simple and elegant appearance, stable performance, and reliable quality. It supports group tag reading, with both long-distance and normal reading modes. A 4.3-inch display shows the number of people entering and exiting. It integrates audible and visual alarms, supporting AFI, EAS, DSFID, AFI+EAS, and DSFID+EAS alarm modes. The device supports network communication.
The high-frequency security gate supports non-cascading installation; security gate channels can be cascaded and used side-by-side at the same entrance/exit. The maximum channel recognition distance is 0-140cm, with a recommended channel width of 90-120cm. The security gate installation location must be in an environment with network coverage and free from rain and dust (this product is not waterproof).
Detail
|
Purchase code (product model) |
AC-HF903 |
|
Performance parameters |
|
|
Operating frequency |
13.56Mhz |
|
Card reading protocol |
ISO 15693 and ISO 18000-3 |
|
Alarm mode |
AFI、EAS、DSFID、AFI+EAS、DSFID+EAS |
|
Sensing technology |
3D sensing |
|
Noise detection |
Support |
|
Tag recognition speed |
>65 times/second |
|
Relay |
Integrates 8-channel relay linkage output |
|
Display function |
A 4.3-inch high-definition display screen can show date, time, pedestrian traffic, customized company logo, alarm information, number of security doors, alarm mode, IP address, dynamic UI, and temperature and humidity (optional). |
|
Alarm light display mode |
1. Breathing light (can be turned on or off); 2. Alarm light |
|
Alarm light |
Choose one of the seven colors (full color, red, white, yellow, green, cyan, blue, purple). |
|
Alarm notification device |
1. Voice input, 2. Buzzer (choose one) |
|
Passive alarm |
Support |
|
Personnel flow statistics |
Using two sets of infrared cutting sensor technology, it is possible to realize the counting of people entering and exiting. |
|
Physical parameters |
|
|
Dimensions (L x W x H) |
570x120x1615mm |
|
Weight |
28kg/piece |
|
Casing Material |
Aluminum alloy, acrylic, sheet metal |
|
Appearance |
White and transparent acrylic |
|
Waterproofing |
Not supported |
|
Channel Width |
Recommended height: 80~120cm |
|
RF Power |
1~8W |
|
Communication Interface |
Network port |
|
Installation Method |
With base, use 4-M8 screws; without base, drill holes for installation, use 4-M8 expansion bolts. |
|
Power parameters |
|
|
Power input |
AC 100～240V；50～60Hz |
|
Maximum power consumption |
30W (rated power 20W) |
|
Environmental parameters |
|
|
Operating temperature |
-20℃～+60℃ |
|
Storage temperature |
-40℃～+85℃ |
|
Relative humidity |
5%–80% RH, non-condensing |