Model: AM-R16E
Sixteen channel E710 RFID module AM-R16E
$87.00
暂无数据
Shipping cost within 10kg is $100, and for every additional 1kg, the shipping cost increases by $5
Description
By using a high-power PA chip, the maximum output power of the module can reach 34.5dBm, and the PA still maintains a linear state when outputting 33dBm;
Ultra low receiving sensitivity and high power output capability, making it easy to identify tags at longer distances;
The module integrated antenna physical connection detection circuit can quickly and accurately detect the antenna connection status of the module port.
Detail
|
Model No. |
AM-R16E |
|
Performance parameters |
|
|
Working voltage |
DC 3.6V ～5 V |
|
Standby working current |
＜50mA (EN pin high-level enable) |
|
Sleep working current |
＜100uA (EN pin low-level enable) |
|
Operating current |
2.1A @ 5V (33 dBm CW Output，25°C)。 1.5A @ 5V (30 dBm CW Output，25°C)。 The average working current is 1.7A @ 5V (33dBm Output, real-time inventory mode, 25 ° C). |
|
Start time |
＜50mS |
|
Working temperature |
－20 °C～＋70°C |
|
Storage temperature |
－40 °C～＋85°C |
|
Working humidity |
＜95% (＋25 °C) |
|
Air Interface Protocol |
EPC global UHF Class 1 Gen 2 / ISO 18000-6C |
|
Working frequency range |
902MHz~928MHz (US frequency band), 865MHz~868MHz (European frequency band) 860MHz~960MHz (custom operating frequency band) |
|
Work area support |
US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Mainland China Japan Korea Malaysia Taiwan |
|
Output power range |
0～33dBm |
|
Output power accuracy |
+/- 1dB |
|
Output power flatness |
+/- 0.2dB |
|
Output RF connector |
SMA connector. |
|
Receiving sensitivity |
＜-85dBm |
|
Peak speed of inventory labels |
﹥850pcs tags/second |
|
RSSI tags |
Support |
|
Antenna connection protection |
Support |
|
Working temperature monitoring |
Support |
|
Number of antenna ports |
16 SMA external thread internal hole female heads |
|
Communication interface |
TTL UART interface |
|
GPIO |
2-way GPIO input, 2-way GPIO output (3.3V TTL level) |
|
Communication baud rate |
standard configuration 115200 bps (optional 38400bps and 460800bps) |
|
The heat dissipation method |
shield the shell and bottom heat sink for heat dissipation, and additional heat dissipation needs to be considered when working for a long time above 30dBm |
|
PIN |
Definition |
Description |
|
1 |
GND |
grounding |
|
2 |
GND |
|
|
3 |
VCC |
power supply DC 3.6V~5V |
|
4 |
VCC |
|
|
5 |
GPIO3 |
1st 3.3V TTL level GPIO output |
|
6 |
GPIO4 |
2nd 3.3V TTL level GPIO output |
|
7 |
GPIO1 |
1st 3.3V TTL level GPIO input |
|
8 |
BUZZER |
Buzzer control, requires external drive |
|
9 |
UART_RXD |
UART RXD(module TTL serial port data input) |
|
10 |
UART_TXD |
UART TXD(module TTL serial port data output) |
|
11 |
NC |
Reserved |
|
12 |
NC |
|
|
13 |
GPIO2 |
2nd 3.3V TTL level GPIO input |
|
14 |
EN |
High level enable to open module (default internal pull-up enable), low level disable module |
|
15 |
NC |
Reserved |